Carbon Steel Ring Type Joint Flanges

 

Carbon Steel Ring Type Joint (RTJ) forged flanges have grooves cut into their faces which accept steel Ring Gaskets. Carbon steel RTJ flanges seal when tightened bolts compress the gasket between the Carbon steel flanges into the grooves, creating a metal to metal seal, deforming the gasket to make Intimate Contact inside the grooves.

 

Carbon Steel RTJ Flanges

 

As we can see in the image shown belllow we can have Ring Type Joints on many type of Carbon steel flanges like Slip-on Ring Type Joint Flanges, Weld Neck Ring Type Joint Flanges, Socket Weld Ring Type Joint Flanges, Blind Ring Type Joint Flanges etc.

 

 

 

An Carbon steel RTJ flange may have a raised face with a metal ring groove machined into it. For Carbon steel Ring Type Joint flanges that seal with BX ring gaskets, the raised faces of the connected and tightened flanges may contact each other. In this case the already coined gasket will not bear additional load beyond the capacity of bolt tension, vibration and movement can not further crush the gasket and lessen the connecting tension.

Carbon Steel A105 Ring Type Joint Flange Size Range :

 

  • ½” NB to Up to 60” NB Subject to Type of RTJ Flange.

 

Send mail to manufacturers and suppliers of carbon steel ring type joint forged flanges

 

ASTM A105 Carbon Steel Ring Type Joint Flanges as per ANSI B16.5

 

We are manufacturers and suppliers of Carbon steel ASTM A105 ring type joint flanges as per ASME / ANSI B16.5 technical standard and specifications, being commonly also known as RTJ flanges in size range from 1/2" NB up to 24" NB. We are manufacturing these carbon steel RTJ forged flanges in all pressure ratings like 150, 300, 400, 600, 900, 1500 and 2500 as per ANSI / ASME B16.5 specifications..

 

ASTM A105 Carbon Steel Ring Type Joint Flanges as per ANSI B16.47 series A

 

We are manufacturers and suppliers of Carbon steel ASTM A105 ring type joint flanges as per ASME / ANSI B16.47 series A technical standard and specifications. being commonly also known as RTJ flanges in size range from 26" NPS up to 60" NPS. We are manufacturing these carbon steel RTJ forged flanges in all pressure ratings like 150#, 300#, 400#, 600, 900#, 1500# and 2500# as per ANSI / ASME B16.47 series A specifications.

 

ASTM A105 Carbon Steel Ring Type Joint Flanges as per ANSI B16.47 series B

 

We are manufacturers and suppliers of Carbon steel ASTM A105 ring type joint flanges as per ASME / ANSI B16.47 series B technical standard and specifications. being commonly also known as RTJ flanges in size range from 26" NPS up to 60" NPS. We are manufacturing these carbon steel RTJ forged flanges in all pressure ratings like 150#, 300#, 400#, 600, 900#, 1500# and 2500# as per ANSI / ASME B16.47 series B specifications..

 

      We do manufacture and supply all metal rings for the carbon steel RTJ flanges, a Ring Type Joint seal is a metal seal which is used if extremely high pressures and/or temperatures is a matter of concern. These rings are always used in connection with special Carbon steel flanges which ensure a tight seal, providing that the correct material and profile were selected beforehand.

      Our RTJ metal seals are manufactured and supplied exclusively in accordance with ASME B 16.20 and API spec 6A in the following profile types.

      R octagonal RTJ metal rings - Octagonal Ring Type Joint seals are predominantly for Carbon steel forged flange grooves where the grooves have a flat bottom and straight sides (angle 23°). They are interchangeable in these grooves with oval Ring Type Joint seals.

      R oval metal rings-The oval ring cross section is designed as a replacement for old types of Carbon steel flange which are no longer produced now a days as a general rule. Oval and octagonal Ring Type Joint seals are interchangeable if they are being used in Carbon steel flange grooves where the grooves have a flat bottom and straight sides (angle 23°).

      RX metal rings- This type is designed to suit the applications for pressure up to approx. 700 bar. These are kind of self-sealing seals which make use of a pressure-generating effect. Here, the efficiency of the sealing function increases as pressure increases. The RX series is interchangeable with the R series rings.

We are proud to establish ourselves amongst the leaders of market as Carbon Steel Ring Type Joint Flanges Manufacturer and Suppliers . Carbon Steel Ring Type Joint forged Flanges available with us provided at reasonable prices with no quality compromise ensures optimum level of customer satisfaction.

 

Ask for any Third Party Inspection With our quality Carbon steel RTJ forged flanges:
Carbon steel Ring Type Joint forged flanges with Lloyds third party inspection and certifications according to EN. 10204-3.2:2004
Carbon steel Ring Type Joint forged flanges with Bureau Veritas third party inspection and certifications according to EN. 10204-3.2:2004
Carbon steel Ring Type Joint forged flanges with DNV third party inspection and certifications according to EN. 10204-3.2:2004
Carbon steel Ring Type Joint forged flanges with SGS third party inspection and certifications according to EN. 10204-3.2:2004
Carbon steel Ring Type Joint forged flanges with Indian Registrar of Shipping third party inspection and certifications according to EN. 10204-3.2:2004

 

 

Apart from Carbon Steel Ring Type Joint Flanges we do manufacture a wide range of Carbon steel forged flanges as mentioned below

 

Send mail to carbon steel ring type joint forged flanges manufacturers and suppliers